STANDARD ROLL CONTAINER MOD4.1 619x853x1700H

STANDARD ROLL CONTAINER MOD4.1 619x853x1700H

Universal rollcontainer  1700x853x619 mm (HxWxD) 
Possibility of connecting into a “train”
Designed for transporting clean/dirty laundry
Wheels: 125 mm diameter, two swivel casters with brakes and two fixed 
Wheel material polypropylene + rubber (quiet transportation)

 4  sides trolley

- two side panels  HxWxD, 1545x589x60 mm

- rear panel  HxWxD, 1515x714x20 mm.

Two side panels with rear panel firmly connected by 4 pcs. screws

Front panel consists of two hinged doors, dimensions HxWxD: 1532x404x20 mm

Hinge 107 degrees for each hinged part

Hinged doors have a door lock in the upper part of the container

Trolley panels material zinc-coated metal

The frame structure is made of pipes d20x1.5mm, mesh part with a rod with a diameter of d-5 mm, the resulting mesh size 210x50 mm.

The side panels of the rack have a metal "pocket" for inserting an information sheet, dimensions HxWxD, 323x217x9 mm

The trolley has 2 easily opening metal shelves  

The trolley-rack has a metal bracket for connecting the trolleys to each other at the bottom in the front part, with a length of 400 mm,

a width of 44 mm, and a thickness of 8 mm. The bracket has a hole for connecting the trolleys, the diameter of the hole is 20 mm. 

There is also a spring that raises the bracket at the moment of coupling, and when the trolleys are disconnected, it raises the bracket 

to a vertical position. The trolley-rack has a corresponding bracket at the bottom in the rear part, which is suitable for connecting

 to the front trolley bracket. The diameter of the bracket rod is 16 mm. The purpose of the connecting bracket: connecting 

the trolleys-racks into a single "train".